Resin Bonded Gravel Drives / Driveways & Resin Bound Gravel Drives / Driveways

Commercial & Domestic Contractors

T : +44 (0)1732 845007

M : +44 (0)7717 803822

E : mail@resinbondedsurfaces.co.uk

** PLEASE DESCRIBE THIS IMAGE ** Resin Bonded Surfaces

21st Century Heritage

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

Welcome

Resin Bonded Surfaces Ltd are suppliers & installers of resin bonded & resin bound surfacing.

We carry out projects for domestic & commercial clients and pride ourselves on delivering 100% of projects on time and on budget.

SUDS Compliant
Resin Bonded Gravel
Resin Bound Gravel
Resin Driveways
Quartz Stone Carpets

Within these pages you will find prices & information that will assist you with your project. If you cannot find what you are looking for please do not hesitate in contacting us.

	Standard Construction for a domestic driveway
	Resin Bonded Aggregate Asphalt AC 6 or AC 10 Dense Surface coarse 100/150 or Brushed Concrete. Minimum fall of 1.0%. 30 - 50mm Depth Well compacted Type 1 granular sub base. Minimum fall of 1.0%. Installed to 100 - 200 mm in depth. Geotextile Membrane ( Optional ) Sub Grade	BondTex - Resin Bonded Aggregate Resin Bonded Aggregate System can be applied in many colours and many sizes. Typical sizes include : S1 = 0.7 - 0.9mm - Show Rooms etc S2 = 0.9 - 1.5mm - Ramps / Footpaths S3 = 1.0 - 3.0mm - Paths / Driveways S4 = 3.0 - 5.0mm - Driveways / Other

The purpose this page is to provide clients with the technical information required to build a base suitable for the installation of a resin bonded surface. The information is provided only as a guide as each project will have slightly different needs. We recommend that any asphalt base installed is well rolled to achieve the best finish.

Where it can be used

Domestic Drives & Paths
Disabled Ramps
Pedestrian areas & Car Parks
Landscape scheme's
Heritage Sites
Regeneration Projects

The Systems we Supply & Install

Resin Bonded Surfacing : This system involves applying a strong cold resin screed, dressing the resin with kiln dried aggregate then removing the excess. This leave a textured surface with very little loose gravel.

Resin Bound Surfacing : This system involves encapsulating all of the aggregate within the resin then applying it to between 15 - 18mm in depth with NO loose aggregate remaining.

Useful Information & Links